Find us : facebookTwitterGoogle +

Swing Doors "classical"

"SUPER STURDY"
these doors are recommended
for heavy duty and intense traffic.

Photo in situation of a swing door

 

Porte Va et Vient charnières Inox couleur Poivre et sel - 1 vantail

Porte va et vient charnières Inox

Porte va et vient charnières Inox à passage intensif

"UNABLE AND DISCRETE"
the PESCH hinge is specially designed
to absorb shocks
and lock the door in open position

 

Porte Va et Vient charnières PESCH

Porte va et vient charnières PESCH

Advantages :

  • unbreakable: equipped with pins, springs
    and stainless steel studs, it is truly
    designed to absorb shocks
  • discreet: with its sober design,
    it occupies only 45 mm in open position
  • optimal hygiene: recessed,
    it facilitates cleaning
  • practical: it locks
    the door in open position.

News

All our doors are delivered complete, ready to assemble and including:

  • SCH 500 leaves, thickness 15 mm.
  • Rear reinforcement in SCH 500, thickness 40 mm.
  • Overlap straps for 1 and 2 leaf doors.
    • Door with 1 leaf: apparent strap of 30 mm.
    • Door with 2 leaves: exposed 55 mm strips
      (distance of 80 mm between the leaves)
      • Advantages :
        • Anti-fingerprint safety.
        • Easy assembly.
        • Catching up the risks of sailing.
  • Flush-mounted polycarbonate porthole, 15 mm thick, for optimal hygiene.
    • oval 600 x 300 mm = standard
    • round diam 300 mm or 360 mm or half moon 720 x 200 or 720 x 300 mm on request at no extra cost.

FIXING ON MASONRY OR EXISTING BUILDING

  • Masonry
    • Doors with stainless hinges are equipped with stainless steel plates, fixed to the hinges and, delivered with 4 stainless steel lag screws, by plate (without dowels). Doors with PESCH hinges are equipped with stainless steel fixing plates.
  • Existing building
    • Doors with stainless hinges are equipped with stainless steel plates, fixed to the hinges. Supplied without screws (turntable or solder plate). In the case of doors equipped with PESCH hinges, it is essential to have a frame width of 60 mm for fixing the door!

FIXING ON ISOTHERMAL PANELS OR PARTITIONS

  • The doors are equipped with U-shaped frames, made of stainless steel sheet, thickness 1.5 mm, pre-drilled to diam. 11 mm, ready to assemble. Detail of the enclosed hardware: Threaded rods diam. 8 mm and stainless steel clamping sleeves. The lintel is included in the price (as well as the amount of cladding for 1-leaf doors). "C" shaped frame on request.
 

Porte Va-et-Vient de type classique à charnières Inox

  • The stainless steel hinge aims to offer increased comfort of use.
  • 180 ° opening
  • Effect comes and goes.
  • Door always closed, which guarantees a separation between the premises.

Advantages
Extremely robust,
these doors are equipped with:

  • hinges and springs while stainless steel, including the springs are virtually unbreakable.

They are particularly recommended
in the following cases:

  • brutal traffic with forklifts,
  • need to keep the doors closed
    (no blocking possible in open position),
  • need to open the door more than 90 °, especially to pass in a corridor. The opening amplitude is about 180 °.

Porte Va-et-Vient de type classique à charnières PESCH

  • The hinge "PESCH" aims to offer a 90 ° blocked opening.
  • Effect back and forth or blockage.
  • Patented hinge cut in the mass.

Advantages
Extremely robust,
these doors are equipped with:

  • hinges "PESCH", with stainless steel pins and springs are almost unbreakable.

They are particularly recommended
in the following cases:

  • normal trolley or human traffic,
  • need to keep doors open (blocking in the open position),
  • small passage size: only 45 mm is lost when the door is in the open position.
 

Porte Va et Vient charnières Inox couleur Poivre et sel - 1 vantail

Porte Va et Vient charnières Inox couleur Poivre et sel - 1 vantail

Porte Va et Vient charnières Inox couleur Poivre et sel - 1 vantail

Interactive catalogs